The Sigma CP-R Repeater is compatible with all Sigma CP control panels which have operating software version V2.0 or above.
Repeaters are available with 2, 4 or 8 zones and in mains powered (K versions) or 24V powered (E versions).
Mains powered repeaters require only a two core data cable from the main control panel. 24V DC versions require an additional two cores for power either from the main panel or from another 24V DC source.
A mixture of Repeaters, Ancillary boards or Sounder Boards up to a maximum of 7 of each type can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.
- Sigma CP-R
- Two wire serial connection
- Up to 7 panels per system
- 230V AC or 24V DC powered versions
- Full control over main panel
- Volt free fire and fault contact outputs
- Ancillary PCB Two wire serial connection
- Up to 7 boards per system
- 230V AC or 24V DC powered versions
- Open collector zonal fault outputs
- Volt free fire, coincidence and common fault contact outputs
Average Rating
0 Reviews
No reviews yet
Write a Review
You must have purchased this product to review it.
